Skip to content

Campaigns and members

Everything in Realm Initiative happens inside a campaign: one table, its DM, and the people who play. You can be in as many campaigns as you like, in a different role in each.

Each person in a campaign has one of three roles:

  • DM: the person who runs the campaign. Every campaign has exactly one. Only the DM can change people’s roles, remove people, make a new join code, set up the display link, decide who sees the dice rolls, let players bring more than one character, hand the campaign over or delete it.
  • Co-DM: helps run the table. A co-DM can run fights, prepare encounters, keep the bestiary and the battle maps, rename the campaign, and see every roll, just as the DM can, but can’t change anybody’s role or touch the DM.
  • Player: plays a character. Everyone who joins with a code starts as a player.

On your campaigns, under Start a campaign:

  1. Enter a Name, up to 80 characters.
  2. If you like, add A line about it, up to 200 characters. It shows on the campaign’s card and at the top of its page.
  3. Select Start the campaign.

You’re its DM, and you land on its Members page with Your campaign is ready. Give players the join code below. Nobody else can see the campaign until you give them its join code. You and your co-DMs can change its name and line later, on the Members page (see Name and description).

Your DM gives you a six-character join code from their Members page. On your campaigns, under Join with a code, enter it in Join code and select Join. You land on the campaign’s page with You’re in. Welcome to the table., and the DM and co-DMs are told you’ve joined.

  • The code doesn’t mind capitals, spaces or dashes, so kv7-m8x works as well as KV7M8X. It never uses 0, O, 1, I or L, so there’s nothing to misread.
  • A code that doesn’t match says That code doesn’t match a campaign. Check it with your DM: it’s six letters and numbers. After ten codes that don’t match in an hour, you’re asked to wait before trying again.
  • If you’re already in that campaign, you go to it with You’re already in this campaign.

Everyone joins as a player. If you’re meant to be a co-DM, the DM makes you one from the Members page.

Your characters belong to you, not to a campaign. Once you’ve joined, bring one in from your library (Characters in your account menu), or make a new one. See Bringing a character into a campaign.

Select a campaign’s card to open it. The top shows its name, your role, and Roll, which opens the dice roller (see Dice). Your campaigns, above the name, takes you home.

Below that are the campaign’s tabs. Which you see depends on your role:

Tab Who sees it What’s there
Tracker Everyone The running fight, or who’s at the table
Encounters DM and co-DMs Preparing and starting fights
Characters Everyone Player characters and NPCs
Bestiary DM and co-DMs The campaign’s monsters
Maps DM and co-DMs The campaign’s battle maps
Party Everyone The treasury, the stash and the lore journal
Dice Everyone The roller, the roll log and the crits
Members Everyone Who’s in the campaign, and the DM’s controls

While a fight is running, Tracker has a dot beside it, and the tab shows the initiative tracker. The rest of the time it shows At the table: the campaign’s line, everyone in it with their role, and No fight is running. The DM and co-DMs get a link to Encounters from there; players are told that when the DM starts one, it shows here.

If a fight is paused, At the table says so at the top (the one paused most recently, if there are several), with the encounter’s name and the round it stopped in, never its turn order. The DM and co-DMs get a link to its tracker, to resume it or change it while it waits; players are told it carries on there when the DM resumes it. See Encounters and the tracker.

Everything in a campaign updates live for everyone in it, so you never need to reload.

The other tabs each have their own page: Characters and the bestiary, Battle maps, The party hub, Dice and the crit tracker.

Members lists everyone in the campaign, with how many people there are: the DM first, then co-DMs, then players by name. Each line shows their picture or initial, their role, and the characters they play (or, if they have none, when they joined). You’re marked You.

What else is on the page depends on your role.

Players see the list, and Leave the campaign. Select Leave…, then Leave to confirm. The campaign goes from your list straight away, and you can come back only with the join code.

The characters you play there come with you, back to your library, with their companions and summons. They leave any fight that hasn’t ended, and their conditions, death saves and “away” are cleared. Whatever they carried stays in the party’s stash, stored “with name, who left”.

Co-DMs see the list, the Name and description panel, which works as it does for the DM (see Name and description), the campaign’s Join code to give to players (with Copy), and Leave the campaign, which works the same way as it does for players.

The DM sees everything here, and does everything from here.

Open the ⋯ menu beside a person:

  • For a player, Make a co-DM.
  • For a co-DM, Make a player, or Hand the DM role to them (see below).

The change happens straight away, and the person is told in their notifications: for example, that they’re a co-DM now and can run the campaign’s fights, encounters and bestiary.

In the person’s ⋯ menu, select Remove from the campaign…, then Remove them. They lose the campaign from their list straight away, and they’re told. They can come back only with the join code, so you may want to make a new one. The characters they play go back to their library, as they would if they’d left, and what those characters carried stays in the stash.

The Name and description panel changes the campaign’s Name, up to 80 characters, and A line about it, up to 200 characters, which you can leave empty. Select Save. The page says Saved. Everyone in it sees the new name and line about it., and everyone in the campaign sees the change straight away. A campaign needs a name: an empty one comes back with Give the campaign a name.

Co-DMs can change the name and description too.

The Join code panel shows the code to give to players, with Copy. It joins them as players; you make co-DMs from the list.

Make a new code replaces it. The old one stops working at once, and nobody already in the campaign is affected. Do this after removing someone, or if the code has been shared further than you meant.

The Characters panel decides how many characters each player brings. With Players may bring more than one off (the default), each player brings one character from their library, and swaps it for another. Turn it on for a small table where one person runs two heroes, and select Save. You and your co-DMs can bring in as many as you like either way, and companions and summons never count. When a player brings a character in, swaps one or takes one out, you and your co-DMs are told in your notifications.

Display link is for a second monitor facing the table, on a device that isn’t signed in, such as a TV’s browser. Make a link creates one and shows it once, with Copy and Open it: copy it straight away, because it isn’t shown again. It shows exactly what a player sees, needs no sign-in, and can’t change anything.

Once a link exists, Make a new link replaces it and Turn it off removes it. Either way, the old link stops working at once, on any screen still showing it. On the computer running the tracker, its Open display button needs no link. See The table display.

Dice rolls decides who sees the rolls made with the app’s dice:

  • Share all rolls: everybody sees every roll.
  • Hide my rolls: players see each other’s rolls, but not yours or your co-DMs’.
  • Hide all rolls: players see only their own.

You and your co-DMs always see every roll, and players always see their own. A change applies to past rolls too. Show rolls on the display makes rolls pop up on the display as they’re made, only the ones every player may see. Select Save. See Dice.

To stop being the DM, hand the campaign to a co-DM. Under The campaign itself, choose the co-DM under Hand it over and select Hand over… (or use Hand the DM role to in their ⋯ menu), then confirm with the button that names them, like Make Priya the DM. They become the DM, with everything only the DM can do, and you become a co-DM. Only they can hand it back. They’re told it’s theirs now.

Only a co-DM can take a campaign over, so if there are none yet, make someone a co-DM first.

Under The campaign itself, select Delete… beside Delete the campaign. Type delete in the box and select Delete it. The campaign goes for everyone in it, with everything that belongs to it: the bestiary’s monsters, encounters, maps, the party hub, the roll log, the crits and their pictures. There’s no undo. Anyone who has it open is closed out of it.

The player characters and NPCs aren’t deleted. Each goes back to the library of whoever keeps it (its player, or whoever made it, if nobody plays it), ready to bring into another campaign.

If two people act at once (say, a co-DM leaves just as you make them a player), the page says Nothing changed: that’s no longer possible. The page shows how things stand now.