Skip to content

Characters and the bestiary

A campaign’s characters are the player characters, the DM’s NPCs, and the monsters in the DM’s bestiary. A character’s sheet holds what the table needs during play, and the tracker reads its HP, armour class and initiative from it. Open a campaign and choose Characters to see the roster, or Bestiary for the monsters.

Player characters and NPCs belong to people, not campaigns: each lives in someone’s character library and is in one campaign at a time. Monsters belong to their campaign’s bestiary.

What you can do depends on your role in the campaign:

  • The DM and co-DMs can read and change every character in the campaign, make new ones of any kind, and decide who plays each player character.
  • Players can read every player character’s sheet. You can change only the player characters you play, and anything you make with New character is a player character that you play. Unless the DM lets players bring more than one, you have one character in each campaign.
  • NPCs and monsters are the DM’s. Players see an NPC’s name on the roster but can’t open its sheet, and never see the bestiary.

The DM and co-DMs always see the numbers. You always see your own character’s numbers, except while your character is in a running or paused fight and the DM shows Status only, when you see the same band as everyone else. Everyone else’s HP shows as the numbers or as a band, depending on whether the DM has chosen Exact HP or Status only for the campaign (it starts as Status only). See What players see.

The bands are:

Band HP left
Healthy 75% or more
Wounded under 75%
Bloodied under 50%
Critical under 25%
Down 0

Characters lists The party (the player characters) and then NPCs, each in name order. A player sees their own first, under Your character here (or Your characters here), and everyone else’s under The rest of the party. Each row shows the character’s picture, name and kind (PC or NPC), its level, armour class and HP, and a line with its race, its classes and who plays it: played by a member, nobody plays them yet, or the DM’s for an NPC. Select a name to open the sheet.

Players see the NPCs section only once the DM has made at least one NPC.

Your character here is where a player brings a character in from their library, swaps it for another, or takes it out, and has a link to Your library. The DM and co-DMs bring their own characters in with From your library…. See Your character library.

When a player can’t make a session, the DM or a co-DM selects Mark away beside their character. An away character keeps its place on the roster with an Away this session flag, is skipped in every turn order, and isn’t added when the DM prepares an encounter with the whole party. Select Back to bring one character back, or Everyone’s back at the top of the roster to clear every flag at the start of a new session. Monsters can’t be marked away.

The DM or a co-DM can reduce a character’s max HP until a long rest, on the tracker (see Max HP reduced until a long rest). On the roster, the character’s HP shows the lower max, and, for whoever sees its HP numbers, a Max HP − flag with the amount. Its sheet says Max HP is reduced by the amount until a long rest, and how high current HP can go for now.

When the party finishes a long rest, select End of long rest at the top of the roster. It clears every max HP reduction in the campaign: on characters, on companions, and on monsters and summon copies in encounters that haven’t ended. A long rest: every max HP is back to full. Current HP is as it was. confirms it. The button shows only to the DM and co-DMs, and only while something’s max HP is reduced.

  1. Select New character. The DM and co-DMs also have New NPC on the roster and New monster in the bestiary. A player has New character under Your character here while they have no character in the campaign, or always if the DM lets players bring more than one.
  2. Fill in the sheet (see below). Only Name is required.
  3. Select Make the character (or Make the monster).

The sheet opens again with Made. Add a picture, or more about them, whenever you like. A picture can only be added once the character exists. A character made in a campaign is in your library too, and a player character the DM makes for a player is in that player’s.

You can also make a character in your library, in no campaign, and bring it in later. See Your character library.

A sheet has these fields:

  • Name: up to 60 characters.
  • Pronouns: he/him, she/her, they/them or it/its. A new character starts as they/them, and a new monster as it/its. The app uses them wherever it writes about the character, such as “More about her” or “What he was carrying”.
  • Kind (DM and co-DMs only): Player character, NPC or Monster.
  • Race and Background, up to 60 characters each. A monster has Creature (such as “Small humanoid”) and Challenge (such as “1/4”) instead.
  • Played by (DM and co-DMs only, player characters only): one of the campaign’s members, or Nobody yet (the DM’s).
  • Classes: see below. Monsters have none.
  • Max HP (1 to 9999), Current HP (0 up to max HP) and Temp HP (0 to 9999). Current HP can’t be more than max HP: temporary HP goes in its own box. Lowering max HP below current HP brings current HP down with it. While max HP is reduced until a long rest, current HP can go no higher than max HP less the reduction.
  • Armour class: 0 to 99.
  • Initiative: the modifier, from −20 to +20, typed like +2 or -1.
  • Speed: free text, such as “30 ft”.
  • For players’ companions and summons (DM and co-DMs only, monsters only): see Monsters for players.
  • Notes: up to 4,000 characters.
  • More about them: extra fields, see below.

Select Save followed by the character’s name to keep your changes, or Cancel to leave without saving. If something isn’t right, the sheet says what, beside the field, and keeps what you typed.

Each class is a row with a name (up to 40 characters) and a level from 1 to 20. There is always an empty row at the bottom: type in Add a class and Level to add one. A character can have up to 12 classes, and their levels can add up to no more than 20. The character’s level is the total, shown under the classes and on the roster as, for example, “Cleric 3 / Wizard 2”.

To remove a class, select the × at the end of its row. That saves the sheet without the row.

More about them holds anything else your table tracks, such as spell save DC, passive perception or resistances. Each field is a name (up to 40 characters) and a value, text or a number (up to 200 characters). Add one in the empty row at the bottom, and remove one with its ×. A character can have up to 40.

The sheet’s pronouns are the character’s, not the player’s. They choose the words in sentences the app writes about the character, so a sheet for a she/her character reads “Remove her” and “Shown beside her name”.

Once a character exists, the Picture panel on its sheet lets you add one. Whoever may change the sheet may change its picture: the player who plays the character, or the DM and co-DMs.

  1. Under Choose a picture, pick a PNG, JPEG or WebP file, up to 2 MB.
  2. If it isn’t square, the panel shows the whole picture with a square on it. Drag the square, or use the slider, to choose what shows.
  3. Select Save picture.

The picture is cropped to a square before it leaves your device, and any location the camera saved in it is removed. HEIC pictures from an iPhone can’t be used: save them as JPEG first, or set the iPhone’s Settings → Camera → Formats to Most Compatible. Remove picture takes it off again. Without a picture, the character shows its first initial on a colour.

The picture appears beside the character’s name everywhere in the campaign, on the tracker, on the battle map and on the table display. Only members of the campaign, and the character’s keeper, can see it. It goes with the character into any campaign it’s brought into.

Selecting a character’s name opens its sheet to read: its pronouns, race, background and who plays it, its level and classes, its HP, armour class, initiative and speed, its notes and extra fields. Beside them, Right now shows its HP as a bar and band, or the band alone, and any conditions it has from a fight. A player character’s companions and summons are listed under that. If you may change the sheet, select Edit.

While the character is in a running or paused fight, its conditions and death saves are the DM’s, kept on the tracker. A player can change their own character’s HP during a fight only while the DM shows Exact HP; in a Status only fight the HP boxes are replaced by the band.

A player character or NPC isn’t deleted from a campaign: it’s taken out, back to the library of whoever keeps it, and can be brought back in.

  1. On the sheet, select Edit.
  2. In the panel headed Take and the character’s pronoun (such as Take them out), select Take and the character’s name out….
  3. Confirm with Take and the name out.

Anything the character was carrying stays in the party stash, stored “with” the character’s name “, who left”. A player can take out only the characters they play, and not while the character is in a fight, running or paused. The DM and co-DMs can take out any player character or NPC at any time. See Taking a character out.

To delete a character for good, take it out first, then delete it from its keeper’s library.

Monsters are the only characters deleted in a campaign, by the DM or a co-DM.

  1. On the monster’s sheet, select Edit.
  2. In the panel headed Delete and the monster’s pronoun (usually Delete it), select Delete followed by the monster’s name.
  3. Confirm with Delete and the name again.

The monster and its picture go from the bestiary for everyone. There is no undo. Companions and summons copied from it onto players’ characters stay as they are.

The bestiary is the DM’s and co-DMs’ list of the campaign’s monsters. Choose Bestiary in the campaign. Players don’t see it, apart from the monsters you offer them for companions and summons.

This campaign’s monsters lists them by name, each with its challenge rating, armour class, HP, creature type, initiative modifier and the first line of its notes. Type in Find a monster to narrow the list by name. Select New monster to make one from a blank sheet, or select a monster to read, edit or delete it. A monster’s sheet is like a character’s, without classes or a player.

Players can copy creatures onto their characters as companions and summons. They see the starter monsters, and only the monsters you mark for them. To offer one, switch on For players’ companions and summons on its sheet and save. In the list, it then shows a For players flag and players may copy it as a companion or summon in place of its notes. Every other monster stays yours alone, and is never sent to a player.

A copy a player makes is their character’s own: changing or deleting the monster afterwards doesn’t touch it.

A monster in the bestiary is a template. When you add it to an encounter, each copy gets its own HP and conditions, so damage in a fight never changes the bestiary entry. See Adding combatants.

Starter monsters lists the site’s starters, offered to every campaign, each with its challenge rating, armour class and HP. They start as 17 common monsters from the System Reference Document 5.1, such as the Goblin, Orc, Owlbear and Wolf. The site’s admins choose which are offered and can add more, so your list may differ. If none are offered, the panel says The site offers no starters just now.

Select Add beside one to copy it into the campaign: Added to this campaign’s monsters. The copy is yours to edit. A starter’s numbers are its armour class, average HP and initiative modifier, with its main attacks and traits in its notes. Changes the admins make to a starter later never change copies already made.

Each starter comes from a source, such as the SRD 5.1. Under the bestiary, each source’s attribution appears once, as its licence asks. For the SRD 5.1, it says that the SRD is by Wizards of the Coast LLC, available at dnd.wizards.com, and licensed under the Creative Commons Attribution 4.0 International License. The same attributions appear where players copy starters as companions and summons.

If you’re the DM or a co-DM of more than one campaign, you can reuse the monsters you’ve made. Copy from another campaign appears in the bestiary when you have another campaign to copy from.

  1. Under Campaign, choose the campaign to copy from. Only campaigns where you’re the DM or a co-DM are listed.
  2. Select Show its monsters.
  3. Tick the monsters you want, and select Copy the ticked ones.

The message Copied into this campaign. confirms it. Each copy comes with its extra fields and picture, and is this campaign’s own: changing it changes nothing in the other campaign.

You can copy up to 50 monsters at a time. If you tick more, the first 50 are copied, with The first 50 you ticked are copied: it’s 50 at a time. Copy the rest the same way.