Skip to content

Dice and rolls

Realm Initiative has dice for anyone who wants them, and they’re never required. Rolling real dice at the table works just as well: everything the app records, it lets you type in. The app’s dice are there for a player at home, for a roll everyone should see, or for anyone who simply likes them.

The DM never needs the app’s dice. Every roll the app keeps track of has a box to type the result into:

  • Initiative: the DM types each number in on the tracker from the dice at the table, and each player can type their own until the fight first reaches them.
  • Damage and healing: type the amount.
  • Death saves: record a success, a failure or the number rolled.

See Encounters and the tracker for all three. Rolling in the app is one more way to get a number, never the only way.

Select Roll at the top of any campaign page. The roller opens over the page:

  1. Choose the die: d4, d6, d8, d10, d12, d20 or d100.
  2. Set How many: 1 to 20 dice at once.
  3. Set the Modifier: a whole number from −50 to +50, such as +4 or −1. It starts at +0.
  4. For a single d20, choose its way: the down arrow for Disadvantage, the dash for Normal, or the up arrow for Advantage. These show only when you’re rolling one d20.
  5. Optionally, say What it’s for, in up to 80 characters, such as “Sneak attack to hit”.
  6. Select Roll.

The result shows in the roller: the total, then what was rolled. The roller keeps your choices, so you can roll the same again straight away. The roll log goes to the Dice page, and Close closes the roller.

You can also roll from the Dice tab, which has the same roller beside the roll log.

A roll is written the way you’d say it:

  • d20 + 4: one d20, plus 4.
  • 2d8 + 2 (3, 4): two d8s, plus 2, with each die’s result in brackets.
  • d20 with advantage (14, 3) + 4: two d20s, keeping the higher (the lower, with disadvantage), plus 4.

When the kept d20 of a single d20 roll comes up 20 or 1, the roll is marked Natural 20 or Natural 1. To count it on the crit tracker, log it there too.

Under the roller, Roll for initiative rolls a d20 and adds the initiative on a character’s sheet. Choose Who to roll for, if you have more than one, and the d20’s way, and select Roll for initiative.

  • A player can roll for their own player characters.
  • The DM and co-DMs can roll for any player character or NPC.

Companions and summons that take their own turn are in the Who list too, after the characters, named with whose they are, such as Biscuit (Pip’s). Whoever can roll for the character can roll for them. Those that act on their character’s turn have no initiative of their own, so they aren’t listed.

While a fight is running, the total goes into the turn order as that character’s initiative, or, for a summon, every copy’s. Roll again, and the new total replaces it. A new total also undoes any tie the DM had settled for that combatant with the arrows (see Settling ties). A player’s roll fills in only where their character is in sight, and only until the fight first reaches that row: from its first turn on, its initiative is the DM’s to change, so the roll is still made and logged, but the turn order isn’t changed. This is the same rule as for typing your own initiative on the tracker. If the DM has hidden that character, the roll is still made, but the turn order isn’t changed, and the log calls it just Initiative, so it doesn’t give the character away. Rolling never re-sorts the turn order: the DM sorts it on the tracker.

If you have no character to roll for, Roll for initiative doesn’t appear.

The dice are rolled by Realm Initiative’s server, not your browser, with a fair random number for every die. Nobody can nudge a roll in their own browser, so a roll in the log can be trusted by the whole table.

The Dice tab shows the Roll log, newest first: who rolled, the total, what it was for, what was rolled and how long ago. Your own rolls carry You. The log shows the newest 50 rolls you may see, and each campaign keeps its newest 200.

It updates live: a roll appears in everyone’s log the moment it’s made.

The DM decides who sees the rolls made with the app’s dice. The DM and co-DMs always see every roll, and everyone always sees their own. For players, the DM chooses one of:

The DM’s choice Players see
Share all rolls Every roll.
Hide my rolls Their own and other players’ rolls, but not the DM’s or co-DMs’.
Hide all rolls Only their own.

A new campaign starts on Hide my rolls. “My rolls” means rolls made by the DM or a co-DM at the time they rolled: a co-DM’s rolls stay hidden even if they later become a player.

The heading of the roll log says which is chosen, for example Sharing: Hide my rolls, and the roller on the Dice page explains it.

If you’re the DM, select change beside it, or go to Members, to choose under Dice rolls, then select Save. Only the DM can change it, not co-DMs. A change applies to past rolls too: switching to Hide all rolls hides rolls already made. In the DM’s and co-DMs’ log, a roll players can’t see is marked Players can’t see this. See Campaigns and members for the rest of the Members page.

The Crits panel on the Dice tab keeps a tally of the table’s natural 20s and natural 1s, from real dice or the app’s, with stats on who rolls the most of each and a chart month by month. Anyone in the campaign can log one. See The crit tracker.

When someone else rolls, the roll can appear on your screen as it happens, on any page of the campaign. It shows as a card: their dice, who rolled, any Natural 20 or Natural 1, the total, and what it was for. Up to three cards stack in the corner at once, each for a few seconds, and you can click one to dismiss it.

You’re sent a roll only if:

  • the DM’s choice lets you see it (see above);
  • you have Other people’s rolls switched on in Settings → Dice; and
  • you haven’t chosen The roll log only.

Your own rolls don’t arrive this way: the roller shows them instead. If you’d rather see nothing pop up at all, choose The roll log only; every roll you may see is still in the log.

Open Settings from your account menu and choose the Dice tab. See Settings and notifications for the rest of Settings.

Under Your dice, pick the set your rolls are shown in, to you and to everyone who sees them. The sets are the ones the site’s admin has switched on. A new site starts with Ember (the default), Bone, Obsidian, Moss, Arcane, Steel and Weathered stone, and an admin can add more (see Administration).

If an admin switches off the set you chose, you roll with the default until you choose again. Settings tells you so, and you hear about it in the bell.

Choose how rolls reach you under How rolls appear:

  • 3D dice: they tumble across the screen and land, then the result shows for a few seconds. Click or press Escape to dismiss.
  • A pop-up: the result, in the corner, for a few seconds. This is where everyone starts.
  • The roll log only: nothing appears; rolls are under Dice.

Other people’s rolls, on to begin with, sends you everyone else’s rolls as they happen, in their own dice, not only yours. It only ever sends rolls the DM lets you see. Switch it off to see only your own rolls appear; everyone’s are still in the log.

With 3D dice chosen, the dice are thrown across your screen and land on the numbers the server rolled. The dice look like the roller’s own set, so you can tell at a glance whose roll it is.

  • Your own roll: from the roller over the page, it closes, the dice tumble, and the result pops up in the corner once they land. On the Dice tab, the result shows in the roller, and the log waits until the dice have landed so it doesn’t give the result away first.
  • Someone else’s roll: the dice tumble, then their card shows over them for a few seconds. Click or press Escape to dismiss it. Rolls that arrive close together wait their turn.

More dice are drawn smaller, so twenty still have room to land, and they’re smaller again on a phone.

If your device asks for reduced motion, you get the pop-up even with 3D dice chosen, and Settings says so. The same happens on a device or browser that can’t draw 3D graphics.

The turn chime is two soft notes that play when the turn moves on, so you can look away from the screen and still know. It’s off unless you switch it on: open Settings, choose the Appearance tab and switch on Turn chime.

It plays while you have the tracker open and a fight is running. Some browsers won’t play sound on a page until you’ve clicked somewhere on it, so click the page once if you don’t hear it.

The DM can have rolls pop up on the display, the screen facing the players, as they’re made. Under Members, in Dice rolls, switch on Show rolls on the display and select Save. It’s off to begin with.

The display shows only rolls every player may see, whatever the DM’s choice, because the whole table is watching it. Rolls on the display always show as pop-ups, never 3D dice. See The table display.