Encounters and the initiative tracker
An encounter is one fight: who is in it, in what order, and how each of them is doing. The DM and co-DMs prepare encounters ahead of time and run them on the tracker. Players follow the fight on the campaign’s Tracker page, which updates by itself as the DM goes.
Preparing and running encounters is for the DM and co-DMs. Players see a fight only while it’s running, and only what the DM lets them see.
Preparing an encounter
Section titled “Preparing an encounter”- In the campaign, choose Encounters.
- Under Prepare an encounter, give it a Name (up to 80 characters).
- If the campaign has battle maps, choose one under Map, or leave it at No map.
- Leave Add every player character who isn’t away ticked to put the party straight in, or untick it to choose by hand.
- Select Prepare it.
Nothing is shown to players until you start it. The tracker for the new encounter opens, marked Not started.
The Encounters list shows every encounter, the running one first, then the paused ones, then the prepared ones, then the ended ones, newest first:
- Running: the round, how many are in the order, and its playing time so far. Select Go to the tracker.
- Paused: the round and whose turn it was, how many are in the order, and its playing time so far. Select Resume to carry on, or Change it to open its tracker while it waits.
- Prepared: how many combatants it has. Select Set it up.
- Ended: the round it ended in, the date, and its playing time. Select Look back to see it, read-only.
The playing time counts only the time the fight was running, such as 38 min or 1 h 12 min, with any time it was paused left out.
Adding combatants
Section titled “Adding combatants”On the tracker, select Add. The panel lists:
- Characters: every player character and NPC. Tick the ones to add. Anyone already in the encounter is marked already in.
- Monsters, from the bestiary: each monster with its challenge rating, HP and armour class. Type How many of each you want, from 0 to 20 at a time. The box won’t take a number outside that range, and says so. A name box appears for each copy, filled in with the number it would get, such as Goblin 3: type a name, such as “Goblin chief”, or leave the box as it is.
- Companions and summons: the companions and summons of the campaign’s player characters, under each one’s name. Tick a companion, or type How many copies of a summon you want, from 0 to 20. Each comes in after its character, who has to be in the encounter too: ticked above, or in already. See Companions and summons in a fight.
Tick Hidden from players until you reveal them to bring them in hidden (see Hiding combatants), then select Add them.
Each monster comes in with its own HP and conditions, under the name you gave it or as a numbered copy: Goblin 1, Goblin 2, and so on, carrying on from the highest number already there. Player characters and NPCs come in once each, and their HP, conditions and death saves are their own, so they carry over from one fight to the next and show on their sheet.
You can add combatants to a prepared, running or paused encounter. If the encounter is on a map, the newcomers take the next free squares along their edge.
Initiative
Section titled “Initiative”Each row has an init box. Type in the number each person rolled at the table: the value saves as soon as you leave the box. Initiative is a whole number from −20 to 60, and clearing the box clears it. A number outside that range isn’t saved: the box tells you A whole number from −20 to 60.
For the monsters, select Roll for monsters without one: the app rolls a d20 and adds each monster’s initiative modifier, for every monster that hasn’t got an initiative yet. Monsters you’ve already typed in are left alone, and so are companions and summons, which you type in or roll for with Roll for initiative.
Players can type their own initiative too, while the fight is running (see Players’ own initiative). Then select Sort by initiative to put the order in place: highest initiative first, then the higher initiative modifier, then by name. Anyone without an initiative goes last. You can move anyone by hand with the Move up and Move down arrows on a row.
Players’ own initiative
Section titled “Players’ own initiative”Once a fight is running, a player who rolled real dice can type the result into their own row on their Tracker page: their character’s, and those of its companions and summons that take their own turn. Above the order, the page says Rolled at the table? Type your initiative in your row. You can change it until your first turn; after that, ask the DM. The number saves itself, like yours, and follows the same rule: a whole number from −20 to 60.
A player can change it until the fight first reaches that row. From then on the row’s initiative is yours to change, and a player’s Roll for initiative no longer changes it either. A typed initiative doesn’t go in the dice log, and it doesn’t move anyone: the order changes only when you select Sort by initiative.
Settling ties
Section titled “Settling ties”When two or more combatants have the same initiative, each of their rows is marked Tie, hidden and away combatants included, since they keep their place for when they’re back. Hover over the mark to see the number they’re tied on.
To decide who goes first, use the Move up and Move down arrows to put the tied rows in the order you want. The app remembers that order, so Sort by initiative and Start keep it rather than going back to the initiative modifier. Your choice lasts until one of them gets a new initiative, typed or rolled; then the modifier and the name decide again, until you use the arrows.
Starting a fight
Section titled “Starting a fight”Select Start. The app sorts the order by initiative first, as Sort by initiative does, keeping any ties you’ve settled, so you don’t need to sort before you start. The fight is in round 1, and the first person in the order who takes turns is up. You can still move anyone with the arrows once it’s running. The campaign’s Tracker tab shows a live dot, and players see the fight on their Tracker page straight away.
Only one encounter runs at a time, though any number can be paused. If another is already running, the tracker asks Pause that encounter first? Select Pause it and start to pause the other one and start this, End it and start to end the other one for good, or Keep it running to leave things as they are. Resuming a paused encounter while another runs asks the same, with Pause it and resume and End it and resume.
Turns and rounds
Section titled “Turns and rounds”The bar at the top of the tracker shows the encounter’s name, the Round, and who is On deck. The row whose turn it is is highlighted and marked Now.
- Select Next turn to pass to the next person. After the last person in the order, it goes back to the top and the round goes up by one.
- Select Previous to step back, for example when someone was skipped by mistake.
Hidden combatants and anyone away this session are skipped, and so are companions and summons that act on their character’s turn (see Companions and summons in a fight). The Away this session button on a player character’s or NPC’s row marks the character away for the whole session, as on the roster: its row fades and is marked Away.
Anyone who has switched on the turn chime in their settings hears two soft notes on the tracker whenever the turn changes.
Damage and healing
Section titled “Damage and healing”Each row has an amount box with Damage and Heal. Type the amount (1 to 9999) and select one. The quick buttons −5, −1, +1 and +5 deal or heal that much in one tap.
- Damage comes off temporary HP first, and HP never goes below 0.
- Healing never goes above max HP and leaves temporary HP alone.
- Healing a character who is at 0 HP clears their death saves.
To change max HP or temporary HP directly, open Conditions and HP on the row, change Max HP or Temp HP, and select Save. Lowering max HP below current HP brings current HP down with it. For a player character or NPC this changes their sheet; for a companion, its own HP; for a monster or a summon copy, only that copy.
Max HP reduced until a long rest
Section titled “Max HP reduced until a long rest”Some attacks, such as a wraith’s Life Drain, reduce a creature’s max HP until it finishes a long rest. Open Conditions and HP on the row, type the amount in Max HP reduced by, and select Save. Max HP is then that much lower, wherever the combatant’s HP lives (a player character’s or NPC’s sheet, a companion, or that copy), and current HP comes down if it was above the new max. Max HP never goes below 1. Healing stops at the reduced max.
The row shows the reduction beside the HP, such as max −6. Type 0 to clear it, or, when the party rests, select End of long rest on the roster to clear every reduction in the campaign at once (see Max HP reduced until a long rest).
Renaming a combatant
Section titled “Renaming a combatant”Select Rename (the pencil) on a row, type the new name (up to 60 characters), and select Save, or Cancel to leave it. The name is for this encounter only: renaming a player character, NPC or companion here doesn’t change its sheet. A renamed monster still shows what it is under its name, for example “Goblin”, so you can tell what “Goblin chief” is.
HP bands
Section titled “HP bands”Every row shows HP as a bar with a band in words, so a glance tells you how everyone is doing:
| Band | HP left |
|---|---|
| Healthy | 75% or more |
| Wounded | under 75% |
| Bloodied | under 50% |
| Critical | under 25% |
| Down | 0 |
Conditions
Section titled “Conditions”Open Conditions and HP on a row and press a condition to switch it on or off. Hover over a condition to see a short reminder of what it does. The conditions are:
- Blinded, Charmed, Deafened, Exhaustion, Frightened, Grappled, Incapacitated, Invisible, Paralyzed, Petrified, Poisoned, Prone, Restrained, Stunned and Unconscious.
The conditions a combatant has show under its name on the tracker, for players and on the display. A player character’s or NPC’s conditions are the character’s own, and stay until you switch them off.
Death saves
Section titled “Death saves”When a player character or NPC drops to 0 HP, Death saves appears on their row with three dots for Successes and three for Failures. The player rolls at the table, and you record the result:
- Select Success or Failure, or
- type the number on the d20 under or the d20 and select Record. If the box is empty or the number isn’t from 1 to 20, nothing is recorded, and the box tells you Type the number rolled, from 1 to 20, then Record. The app applies the rules: 10 to 19 is a success, 2 to 9 a failure, a 1 counts as two failures, and a 20 brings the character back at 1 HP and clears the saves.
Three successes make them Stable; three failures, Dead. You can also select Stabilise (for a Medicine check or a spell) or Reset to clear the saves. Healing them above 0 HP clears them too.
Secret from players is on to begin with: players see that saves are being rolled, but not the count, until it’s settled. Switch it off to show players the dots. Monsters don’t make death saves, and nor do companions and summons unless their character’s sheet says they do.
Hiding combatants
Section titled “Hiding combatants”The eye on each row shows whether players can see that combatant: an open eye while they can, and a crossed-out eye while it’s hidden. Hover over it for Players can see this. Press to hide. or Hidden from players. Press to reveal.
Press the eye to hide a combatant, such as an ambusher the party hasn’t spotted. A hidden combatant is marked Hidden on your tracker, is skipped in the turn order, and is never sent to players or the display at all: they don’t see its name, its picture, or that anyone is missing. Press the eye again to reveal it.
To remove a combatant from the encounter altogether, select Remove from the encounter (the ×). Removing a player character takes its companions and summons out too. If it was their turn, the turn moves to the next person.
A character taken out of the campaign (see Characters and the bestiary) leaves every encounter that hasn’t ended, with its companions and summons, and the turn moves on if it was theirs.
Companions and summons in a fight
Section titled “Companions and summons in a fight”A player character can have companions and summons, made on its sheet: see Characters and the bestiary. In a fight:
- A companion comes in once. Its HP is its own and carries over from one fight to the next, like a character’s.
- A summon comes in as numbered copies, Wolf 1, Wolf 2 and so on, each at its full HP. Each copy’s HP is its own, for this fight only.
- The conditions and death saves of both are for this fight only. Only those set to make death saves roll them; otherwise, at 0 HP, they’re down.
Each row shows Companion or Summon, and under the name what it is and whose it is. If its character is away, so is it.
Bringing them in
Section titled “Bringing them in”You can add them under Companions and summons in Add (see Adding combatants), to a prepared, running or paused encounter.
A player can bring their own in during a running fight, while their character is in it and not hidden. Their Tracker page has a panel for each of their characters in the fight, headed with the character’s name and companions and summons, which says whether each is in this fight:
- For a companion, select Bring into the fight, or Take out of the fight.
- For a summon, choose how many and select Summon (or Summon more), or Dismiss it (Dismiss them for more than one) to take every copy out.
A player can also dismiss one summon copy with the × on its row. You see them appear on your tracker, and can change or remove them like anyone else; on your tracker, the × on their row is Dismiss.
Their turns
Section titled “Their turns”A companion or summon either acts on its character’s turn or takes its own turn, as its character’s sheet says.
- On its character’s turn: it’s listed straight after its character, indented, with on Pip’s turn (the character’s name) where the initiative would be. It has no turn of its own: Next turn passes over it, and it lights up with its character while it’s their turn. It has no arrows; it moves with its character.
- Its own turn: it has its own row and initiative, like anyone else.
Pausing and ending a fight
Section titled “Pausing and ending a fight”When the session stops mid-fight, pause it rather than end it.
Pausing
Section titled “Pausing”Select Pause in the encounter bar, and confirm with Pause, or Keep fighting to carry on. The fight stops where it is, on the same round and turn, with every HP, condition and death save kept, and you return to Encounters, where it’s listed as Paused.
While it’s paused:
- You and your co-DMs can still change it: select Change it on Encounters to add or remove combatants, and change HP, initiative and names. Next turn and Previous wait until it resumes. A paused tracker doesn’t update itself, so reload it to see a co-DM’s changes.
- Players’ Tracker page and the display show only that it’s paused, not the order (see What players see).
- Players still can’t see or change any HP the fight hides from them, on the tracker or on their sheets.
To carry on, select Resume on Encounters, or on its tracker. It picks up on the same round and turn, and players and the display see it again straight away.
Did you forget to pause?
Section titled “Did you forget to pause?”If a running fight goes three hours without you or a co-DM changing anything in it, the next time one of you opens the tracker it asks Did you forget to pause the encounter**?** It says when the last change was, and what it was, such as “Goblin 2 took 4 damage”. If the game stopped there, pause it now and log when it really stopped, so its playing time comes out right. Under Log the pause at, choose:
- the time ten minutes after that last change, or
- Another time, and type when the game stopped: no earlier than the last change and no later than now.
Then select Pause it. Times are in the time zone in your settings. If the fight is still going, select It’s still going: that counts as a change, so you won’t be asked again for another three hours.
Ending
Section titled “Ending”Select End in the encounter bar. Ending is for good: the encounter is kept, read-only, to look back on, but it can’t be reopened or resumed. On a running fight, the question offers Pause instead. Select End it for good to end it, or Keep fighting (Keep it paused for a paused one) to leave it.
The fight stops, players’ Tracker page goes back to showing who is at the table, and you return to Encounters. An ended encounter is kept read-only, so you can Look back at the order, initiative and HP as they were.
What players see
Section titled “What players see”While a fight is running, a player’s Tracker page shows the encounter’s name, the round, who is on deck, and the turn order with each combatant’s initiative, picture, name, kind and conditions. Their own character is marked You, and its companions and summons Yours. Until the fight first reaches them, their own rows have an initiative box (see Players’ own initiative). When it’s their turn, a banner says Your turn, with a reminder of their action, bonus action and movement, any of their companions and summons that act now too, and who is up next. Hidden combatants are left out entirely.
How HP shows depends on the DM’s choice, made on the tracker under Exact HP or Status only. It applies to the whole campaign, and a new campaign starts on Status only.
- Exact HP: players and the display see everyone’s HP numbers and bar. Each player can deal damage to or heal their own character, and its companions and summons, from their Tracker page, with Damage and Heal.
- Status only: players and the display see only each combatant’s band, their own character’s included, with no numbers and no bar. The DM keeps track of HP for the fight, and players can’t change their own HP until the DM shows exact HP.
Death saves show as the dots, as Stable or Dead, or, while they’re secret, as Being rolled. The DM is keeping them secret until it’s settled.
When no fight is running, the Tracker page shows the campaign’s description and who is at the table. If a fight is paused, it also says so, with the fight’s name, is paused, and Stopped in round and the round. It carries on here when the DM resumes it. Players see nothing else of a paused fight: not the order, the HP or the map. The DM and co-DMs see the same note, with a link to its tracker.
If the encounter is on a map, players see the map above the order and can move their own character. See Battle maps.
It all updates live
Section titled “It all updates live”Everyone’s Tracker page updates by itself as the DM runs the fight: turns, damage, conditions and death saves appear for every player, on every co-DM’s tracker and on the table display, without anyone reloading. If you’re typing in a box when an update arrives, the page waits until you leave the box, so it never eats a half-typed number.
If the connection drops, the page says The connection dropped. Reconnecting… and picks up where it left off when it’s back. Without JavaScript the tracker still works: every button is an ordinary form, and you reload to see the latest.
